How to Use a Grease Gun Proper Use with 8 Steps?

Grease guns are handy tools mostly used by home mechanics. This is because car parts will need to be greased frequently to reduce friction and extend the life of the parts. With this gun, grease can be injected into hard-to-reach areas with ease. It is easy to use a gun once it is taken apart and loaded. But it is not everyone that knows how to use a grease gun safely particularly the first-timers. Using this type of gun is not rocket science. Reading this article will help you understand easily.

How to Use a Grease Gun? You Can Follow This Step Properly

What is a Grease Gun?

A grease gun is a tool that is loaded with grease to lubricate car parts, tools and machinery. Lubricated parts work like new when frequently greased. The grease minimizes friction to elongate the life of the parts.

In addition, using a gun helps to reach the difficult areas of the car parts.

Loading a Grease Gun

You must understand how to load a grease gun if you want to use it properly. Just follow these steps to load a gun correctly.

Step 1 – Remove the Grease Gun’s Head From Its Barrel

The very first thing to do is that you need to hold the grease gun and take out the head from the barrel. Doing this allows you to have access to its rod handle.

Step 2 – Pull the Rod

The next thing to do is to pull the rod. Then, lock it in. By doing this, you can have access to where the grease is stored within the tube.

Step 3 – Refill the Cartridge With Grease

Now, refill the cartridge with grease. After refilling it, insert it back into the barrel. If not, it will be difficult for the grease to come out from the grease gun. It makes sense to clean the tube after you have pulled out the old cartridge. You have to push the cartridge in enough and the rim will have to be in contact with the rim of the gun. In this case, it is important to pay attention to the grease brake pad.

Step 4 – Reinstall the Barrel

Install the barrel to end cap even as you keep it loose. Next is to turn out the rod handle from the end cap and release it. Ensure there is enough pressure to force the grease out from the tube. If you notice there is no pressure, you will have to depress the rod handle. This forces the grease to stay in the grease gun’s head.

Step 5 – Attach the Nozzle

Before attaching the nozzle, you need to pump out a little amount of grease via the nozzle. Also, make sure that the pumped-out grease is clean.

Step 6 – Tighten the Cap

It is time to tighten the end cap that was removed earlier. You have to push down the air bleeder to force out air. There will be stable pressure once the air is released.

Step 7 – Place the Gun Coupler

Place the gun coupler at the end of the hose. This helps you to grease the exact place that you need to grease.

Step 8 – Pump the Lever Handle

The last thing to do is to pump the lever handle. This ensures that the grease flows correctly from the gun.

What Kind of Grease is Ideal?

What type of grease is ideal for your grease gun? Since there are different types of lubricants out there, it can be confusing choosing the right grease. For best result, it makes sense to choose heavier and thicker grease.

You can also go for pre-filled cartridges in the market if you are not interested in making use of the same cartridge all the time. It is recommended you purchase in a refilled cartridge.

Maintenance of Grease Gun

Using a grease gun is not just about pulling the trigger. The tool has to be properly maintained for continuous functionality. Each time you pour in grease into the gun, make sure the grease nipple is well cleaned by pumping out excessive grease. Completely wash and dry the nipple. It is highly recommended you wash the nipple with warm water for great result.

Tips to Properly Maintain Your Grease Gun

  • Avoid mixing an existing grease with a new one
  • Don’t tighten the head of the gun too much
  • Adhere to safety precautions before using a grease gun. Always wear a pair of gloves
  • Be careful because a lot of the lubricants are flammable
  • Handle a gun very well to avoid a spill on the floor

Frequently Asked Questions

Q: What is the Amount of Pressure That the Grease Gun Churns Out?

Answer: For every shot, a grease gun can put out up to 15,000 PSI. However, some of the bearing lip seals cannot take more than 500 PSI. The reason for this is that grease guns can generate a lot of pressure that can blow out the protective seals.

Q: What Are the Types of Grease Guns in the Market?

Answer: There are mainly three types of grease guns – pneumatic, battery-powered and hand-powered.

Pneumatic grease gun – This is an air-powered gun. It squeezes air into the gun

Battery-powered grease gun – This type of  gun is powered by a battery. It is mainly used by professionals. It can pour out a good amount of grease at a high pressure

Hand-powered grease gun – It produces pressure through a trigger mechanism or by hand cranking. The other type of hand-powered gun pushes out grease through a piston

Q: Is It Necessary to Use Protective Gears When Using a Grease Gun?

Answer: It is good to use protective gears when working with a grease gun. It enhances your safety. Using a pair of gloves is enough but you will have extra protection if you also use eye goggles.

Q: What Amount of Grams Can One Find in a Grease Gun?

Answer: It all depends on the age and size of the gun. The normal amount of grease that comes out from a grease gun is 3 grams. It can also be more than that.

Final Verdict

Machinery requires lubrication. This is why the grease gun is inevitable. Applying grease to moving parts extends the life of the parts. We have been able to put you through on how you can make use of a gun safely. When using a grease gun, remember, it is safety first.

Leave a Comment